On-Site Guide (BS 7671:2018+A2:2022) (Electrical Regulations)

Product Information

BS 7671:2018+A2:2022 includes several new updates that are considered essential for anyone engaged in electrical installation activities.

Updates to 18th Edition - BS7671- IET Wiring Regulations

The guidance is based on the requirements of BS 7671: 2018+A2:2022 Requirements for Electrical Installations, and references to Regulation numbers are to those contained in that Standard. Additional Details AuthorThe 18th Edition Amendment 2 IET Wiring Regulations contains important new information for all electrical installers and engineers. This digital NICEIC Guide is intended for contractors who carry out electrical work in dwellings, including houses and flats.

BS 7671:2018+A2:2022 Requirements for Electrical

This NICEIC Guide is intended for contractors who carry out electrical installation work indwellings, including houses and flats. Arcs can be caused by insulation defects in cables, damage to cables by impact and penetration of nails and screws, loose terminal connections, and so on. An AFDD is designed to operate (trip) when a dangerous arc is detected by analysing the signature of the arc. Switching arcs caused by fluorescent lighting, for example, should not cause an AFDD to operate. AFDDs can be installed in distribution boards and consumer units to protect final circuits and should be installed in accordance with the manufacturer’s instructions. When installing components from a different manufacturer to that of the existing equipment in a distribution board or consumer unit, it is important to seek advice from the manufacturer that the new equipment is suitable and compatible.Regulation 443.4.2 requires protection against overvoltages to be considered in the case of equipment likely to produce switching overvoltages or disturbances and gives conditions.

18th Edition Publications | All our publications now updated

The concept of the PEI has been developed to answer the needs of the end-user. For example, where a PEI has a storage capability, the user could take advantage of low demand to store energy when its price may be lower.These changes reflect requirements in European and international standards, as well as input from the Health & Safety Executive (HSE) and the Independent Review of Building Regulations and Fire Safety (2018). BS 7671:2018+A2:2022 Requirements for Electrical Installations, IET Wiring Regulations 18th Edition (inc. changes from first amendment, published Feb 2022) Regulation 443.4.1 now requires protection against transient overvoltages to be provided where the consequence caused by the overvoltage could result in: